Precautions for USB cable

Do you know the precautions for a glowing USB cable?

1. The luminous data cable is prohibited from being directly connected to the city lighting power supply without a driver.

2. Dynamic flashing is controlled by the driver circuit.

3. Cutting is not allowed when powered on The electrode at the cutting joint should not be short circuited and should be treated with waterproofing and sealing.

4. Flexible neon lines should not be pulled, bent or folded during connection and installation.

5. The calibration length of the driver should correspond to the actual use of the light-emitting wire, otherwise it may damage the light-emitting wire and the driver, causing danger The driver should be used at the specified voltage The driver must not be unloaded.

6. The luminous data cable may be damaged during transportation and installation, causing it to generate heat during operation. In this case, the power should be immediately cut off and returned to the seller for repair.

7. When using the luminous data cable, there should be no flammable or corrosive materials in the surrounding environment to avoid danger.

8. Professional guidance should be provided during the installation and technical connection process.

9. Light emitting wires, drivers, and power supplies should be supervised to prevent accidents.